GeekVape introduced to the market Zeus X Tank. The novelty is designed for two windings, has an upper air intake, but the lower side blowing of the spirals. It is made of stainless steel and is presented in 6 colors, comes with two glass options - Bubble Glass is pre-installed at 4.5 ml and straight at 3.5 ml, has top air supply, with the ability to adjust the puff using a ring, but by side blowing two spirals through a special dome, while coil blown from the bottom.
Inside the drip-type is smoothed under the cone, so the drops of condensate will not be collected from above, but immediately flow down. The second yellow tipka from ultema also has a narrowing towards the center and is pleasant to use.
Next comes the top cover for refueling atomizer. It has no threads and previously stood in Zeus RTA and Zeus Dual RTA. Very convenient and fast, just press on top of the top-cap and scroll half a turn and unscrew it. The upper filling has recessed holes that will not allow the liquid drops to remain on top and squeeze out when the top cover is tightened.
Very convenient and fast when using the new mod-Eleaf iStick Mix Mod, just press on top of the top-cap and scroll half a turn and unscrew it. The upper filling has recessed holes that will not allow the liquid drops to remain on top and squeeze out when the top cover is tightened.
I really liked the tank, firstly it wasn’t spillage - the slurry wouldn’t go up, secondly, it was a quick refill, the lid was removed very quickly and refilling was done, even with bottles with large nozzles. About the taste, it can be said that here it is simply revealed wonderfully, especially on berry liquids, it is very tasty. On the installation of cotton wool and how to lay cotton wool - in general there are no questions, everything is simple and clear. Vatu sometimes, depending on the used slurry, can be combed, removed too much.
>>You may also want
