vapesourcing best e-cigs & vaping news

Guys, have you paid any attention to the GeekVape Frenzy Kit? When we are at the first sight of GeekVape Frenzy Kit, it will remind us of Lost Vape Orion Kit because they look so similar. Now let’s make a short comparison between Geekvape pod vape and Lost Vape pod vape, so which one do you like better?

1. GeekVape Frenzy Kit

Geekvape Frenzy Pod works with built-in 950mAh battery and smart AS Micro Chipset, which is beautifully crafted with zinc alloy & Resin. The GeekVape Frenzy Kit also comes with the new replaceable NS mesh coils to bring optimal flavor and clouds to the vapers, featuring the automatic output matching function, battery life indicator and magnetic connection.

2. Lost Vape Orion Kit

Lost Vape Orion Kit is powered by built-In 950mAh battery and the maximum output can reach up to 40W with 3 power output modes, integrating an Evolv chipset. Lost Vape Orion Replacement Pod has two different pod bring different vaping experience, 0.25ohm vapor pod will offer masive clouds and the flavor pod with 0.5ohm can provide great taste for you.

Where to buy them? You can go to Vapesourcing chinese vape store to find them

>>you may also like

geekvape frenzy pod cartridge

Many vapers may have an impression on the OBS Cube MTL Kit if you are the fans of OBS brand. If you don’t have the OBS Cube MTL Kit in hand, it’s the time to order the newest OBS Cube Series vape kit - OBS Cube Mini Kit, so does the OBS Cube Mini Kit perform better than OBS Cube MTL Kit?

OBS Cube Mini Kit is made of Zinc Alloy and 304 Stainless Steel, designed for MTL vape with low power output. Powered by 1500mAh integrated battery, it can provide you the long battery life-span. The big and responsive round button of Cube Mini battery makes operation easier than ever. 3 color LED indicator remind you the status clearly.

You can have the option for the e-juice capacity because this tank comes with two juice capacity, 2ml and 3ml. Plus the top refilling design and bottom airflow system, the Cube Mini Kit will bring you a great vaping experience. Moreover, the innovative cores of Mesh tank will fit juices of different strength.

Main feature:
Portable size with 1500mAh inbuilt battery
6 battery protections
Low power output starter kit for MTL vape
0.96 inch LED screen with exquisite buttons
Tri-color LED indicator shows battery status
2ml regular/3.5ml bulb tube for replacement
Different cores attached for nic salts with different strength

So how about the OBS Cube MTL Kit? This vape kit contains OBS Cube Mod and Engine MTL tank. This kit comes with ergonomic design, exquisite appearance and comfort grip. Powered by a built-in 3000mAh battery, it can fire up to 80w output.There is a 0.96″ LED screen to show the date more clearly.

As for the Engine MTL atomizer, it features top cap clip-on design and top filling system, it is easy to refill liquid without leaking. You can adjust the airflow precisely because of the new top airflow adjustable system. At the same time, The two post deck is specially designed for single coil building, air hit the coil directly from the bottom and produce a better flavor.

Main Features:
Ergonomic design and exquisite appearance, comfort grip
3000mAh high rate battery, safe and durable
0.96″ large LED screen, easy to read
Capable of 80W maximum output
Intelligent protections, more stable, more secure
2ml with top filling design
New top airflow adjustable system
Single coil build

Do you think which one do you like better between the OBS Cube MTL Kit and OBS Cube Mini Kit? If you want to experience the MTL vaping, both are the best choice for you, and it depends on you to choose the one you like better.

read more about OBS Cube kits just go to Vapesourcing vape online have a look

you may also like:

Aspire Reax Mini Kit review

GeekVape introduced to the market Zeus X Tank. The novelty is designed for two windings, has an upper air intake, but the lower side blowing of the spirals. It is made of stainless steel and is presented in 6 colors, comes with two glass options - Bubble Glass is pre-installed at 4.5 ml and straight at 3.5 ml, has top air supply, with the ability to adjust the puff using a ring, but by side blowing two spirals through a special dome, while coil blown from the bottom.

Inside the drip-type is smoothed under the cone, so the drops of condensate will not be collected from above, but immediately flow down. The second yellow tipka from ultema also has a narrowing towards the center and is pleasant to use.

Next comes the top cover for refueling atomizer. It has no threads and previously stood in Zeus RTA and Zeus Dual RTA. Very convenient and fast, just press on top of the top-cap and scroll half a turn and unscrew it. The upper filling has recessed holes that will not allow the liquid drops to remain on top and squeeze out when the top cover is tightened.

Very convenient and fast when using the new mod-Eleaf iStick Mix Mod, just press on top of the top-cap and scroll half a turn and unscrew it. The upper filling has recessed holes that will not allow the liquid drops to remain on top and squeeze out when the top cover is tightened.

I really liked the tank, firstly it wasn’t spillage - the slurry wouldn’t go up, secondly, it was a quick refill, the lid was removed very quickly and refilling was done, even with bottles with large nozzles. About the taste, it can be said that here it is simply revealed wonderfully, especially on berry liquids, it is very tasty. On the installation of cotton wool and how to lay cotton wool - in general there are no questions, everything is simple and clear. Vatu sometimes, depending on the used slurry, can be combed, removed too much.

>>You may also want

https://vapesourcing.com/geekvape-aegis-solo-kit.html

The IJOY Mercury Starter Kit is a new release from iJoy and is a pod mod which has similar styling to their larger Shogun Univ Mods. Since this is a pod mod - it is a low-power device designed for high nicotine or nicotine salt electronic liquids. Power consumption is low, so smaller batteries can be used to make the pod mod more portable. In this case, however, the built-in battery has a 1100mAh.A cut was made in the fuselage to look at the remaining electronic levels in the pod.

The pod is basically a tank filled with 2ml of its own vape juice through a top filler. Inside the pod are coil heating elements. The kit includes a 1ohm mesh coil and 1.2ohm standard coil. Four colors are available - B-Ghostfire, R-Crystal Purple, G-Splendor, and RC-Hellfire.

iJoy Mercury Kit Specs
Size: 40x20x78.4mm
E-liquid Capacity: 2ml
Battery: 1100mAh (internal)
Material: Zinc alloy, Stainless Steel and Resin
Output: 12W
Top fill
Coils: 1ohm Mesh / 1.2ohm standard
E-liquid viewing window
LED indicator lights
Adjustable bottom airflow

Another Vape Pod-Innokin Z-BIIP Audible AIO Preview

Innokin Z-BIIP Pod is basically Zenith AIO (All In One). The Zenith series is designed for MTL vapers - those that love the restricted high nicotine salt fluid, high throat-style vape. This style is usually favored by quitters because it is closer to the feeling of smoking. The battery section inside is a very decent 1500mAh battery - suitable for pod mod devices. Zenith coil is available in this kit, as is a new PLEX3D mesh coil, which is 0.48 ohm, and is a 3D mesh.

It’s basically a network with ridges. The greater surface area in contact with e-liquid = higher efficiency. It’s like the fins on a radiator. You can also adjust the power to suit the coil you are using - there are 3 power levels - high (16W), medium (14W) and low (11W).

>>Do you interest the reviews about the iJoy Mercury and Innokin Z-BIIP Audible? If you still need to learn more you can go to vapesourcing online shop vape to get more details!

>>You may also want

https://vapesourcing.com/smok-trinity-pod.html

Vandy Vape has released the jackaroo mod. It includes a shock-resistant and sealed mod that supports three types of batteries, as well as a small tank on the “grid” evaporators. The basis for the box mod was a black rubberized plastic that provides protection against moisture and mechanical damage. The case was designed in the form of an ergonomic handle with a corrugated back wall, as well as an emphasis and a bend “under the grip".

At the ends, with the help of screws, they fixed decorative panels, available in ten variations, from textolite or “epoxy". The front side was supplied with a familiar set - around fire button, a display and the “+/-” keys. The battery cover was supplemented with a folding key and sent to the bottom.

The board supports varivat, varivolt, bypass and thermal control, and also allows you to select the color of the interface. Maximum power is 100 watts. For a power supply, you can use three types of batteries - 21700, 20700 and 18650. Resistance varies in the range from 0.05 to 3.0 Ohms.

Another released vape device by Vandy Vape is the widowmaker rda for sale. Dripka received an airtight construction, a base for one or two spirals and a set of interchangeable skirts with various air holes.

Created together with the Spanish blogger El Mono Vapeador. The color design of the device was varied with five variations. From above, it was suggested to fix a solid thermoplastic chip or a narrow-profile topkep with an 810th drip tip.

For greater variability of the side airflow, vandy vape provided for three interchangeable skirts at once, differing in shapes and number of air holes. The inner walls are complemented by peculiar gateways that protect against leakage.

Inside there are four rectangular racks with screws in the walls and holes in the upper platforms; you can fix them on one or two spirals. The intensity of the blower is adjusted by rotating the side skirt. On the sides of the base, there are cuts for fixed fixation of the dome. Tray allows you to fit at least one milliliter. There is a pin for squash.

>>Do you interest the Vandy Vape JACKAROO Kit & Vandy Vape Widowmaker RDA? You can purchase them at vapesourcing cheap vape online shop.

 >>You may also like

https://vapesourcing.com/freemax-twister-kit.html